- Brand: AREXX
- Model: V843
- Quantity: 1
- Color: Blue + white
- Material: Plastic + PCB + metal
- DIY development the interesting of study, have infrared induction tracking a moving object + obstacle avoidance function, teaching practical very strong
- Atmega8A MCU+USB interface + Infrared photosensitive sensor
- Application: Educational Students to learn programming DIY development interest
- English Manual/Spec: Yes
- This is a general purpose robot platform designed to allow students to easily build their first robot. The breadboard provides a solder free method of connecting almost any processor to its sensors and servos.
- Using 2 servos modified for continuous rotation, speed and direction of both wheels can be controlled using only 2 digital outputs.
- The 4 infrared sensors on the base can be used as analog or digital inputs for either edge detection or obstacle avoidance. Four indicator LEDs are wired in parallel with the IR LEDs and can be individually controlled.
- The pan / tilt universal sensor bracket is driven by two miniature servos allowing additional sensors / devices to be aimed by the processor using only 2 digital outputs.
- The infrared compound eye can be mounted on the pan / tilt assembly allowing the robot to track moving object or detect obstacle up to 200mm away.
- Voltage rails can be isolated and connected to different voltages allowing the use of 3.3V and 5V devices together.
- Batteries can be recharged using a 9V DC plug pack when the power switch is in the off position.
- With the IR LEDS and sensors, two or more it can talk to each other, which will allow us to organize a robot football match.
- Using the Bluetooth or Wi-Fi mold, can communicate with other robots or devices.
- If users add a digital camera instead of the compound eye of it, he can transmit the information he recorded to the computer.
- Packing list:
- 1 x Motherboard
- 1 x Breadboard
- 1 x Compound-eye PCB
- 1 x IC (Atmega8A MCU)
- 1 x Cable pack (140 jumper wires)
- 1 x Screwdriver
- 1 x Hex wrench
- 1x USB connector
- 1x USB download cable (130cm)
- 2 x Head shrink tubes
- 2 x Battery holders (2 x AA)
- 1 x Speaker
- 2 x Sensor mounting bracket
- 1 x Servo mounting bracket
- 2 x Wheels
- 2 x 38g Modified Servos
- 2 x 8g Miniature Servos
- 2 x 8g Servo horns
- 1 x Ball caster
- 4 x Brass nuts
- 4 x Hex Spacers (female to female)
- 8 x Hex Spacers (female to male)
- 2 x Round Spacers
- 21 x M3 Screws
- 4 x Flat head M3 Screws
- 12 x Self-tapping screws
- 4 x M3 Spring washers
- 10 x M3 nuts
- 5 x M3 Nylon nuts
- 4 x M3 flat washers
- 8 x Nylon washers
- 1 x 390 ohm Resistor
- 1 x 18 ohm Resistor
- 4 x 75 ohm Resistors
- 2 x 39 ohm Resistors
- 1 x 820 ohm Resistor
- 5 x 180 ohm Resistors
- 4 x 10K ohm Resistors
- 4 x 2.2K ohm Resistors
- 4 x 4.7K ohm Resistors
- 2 x Diodes (IN4001)
- 3 x Electrolyze Capacitors (470uF)
- 1 x Electrolyze Capacitor (10uF)
- 3 x Capacitors (0.22uF)
- 5 x Transistors
- 8 x IR LEDs
- 12 x Photo Transistors
- 4 x Green LEDs
- 1 x Red LED
- 1 x Orange LED
- 1 x 7 pin right-angle male header
- 8 x 3 pin male headers
- 2 x 2 pin male headers
- 1 x 2 pin socket
- 1 x DC connector
- 1 x Switch
- 2 x 2 pin female headers
- 2 x 4 pin female headers
- 8 x 3 pin female headers
- 2 x Header jumpers
- 1 x 2 pin female socket
- 2 x Crimp connector
- 1 x CD (including Chinese and English manual, demonstrated videos)