0.28" LED 3-Digital DC Voltage Current Measurement / Red LED Dual Display 12V + Shunt (0~100V / 50A)
SKU: 228311 (Added 2013-07-12)
Sale Price:
US$ 13.18
Price:
US$ 10.76
Shipping: Free shipping
- Model: 03100291
- Color: Black
- Material: Plastic
- Features:
- Operating voltage: DC 4.5 ~ 30V;
- Measure voltage: DC 0~100V;
- Minimum resolution(V): 0.1V;
- Measure current: 50A (require external shunt);
- Minimum resolution(A): 0.1A;
- Operating current: <20mA;
- Display: 0.28" LED 3-digital tube;
- Display color: Red;
- Dimensions: 48 x 29 x 21mm;
- Mounting cutout: 45.5 x 26.5mm;
- Refresh rate: about 500mS / times;
- Measure accuracy: 1% (+/- 1-digit);
- Operating temperature: -10C~65C;
- Operating humidity: 10%~80% (non-condensing);
- Working pressure: 80 ~106kPa
- Applications: Suitable for automotive / electric cars / motorcycles battery monitoring or other products voltage current measurement;
- Notice:
- The voltage between the thin red and thin black lines must be within DC 4.5~30V;
- The ammeter can only be connected to the negative of the device under test;
- Exceeds 5A, long-term full load working continuously, it is recommended that the measurement side of the leads are directly soldered to the socket;
- When the black thin line vacant, it is better to use insulating tape around the exposed part of the wire, to prevent short circuits; If just be used as a voltmeter, it is recommended that the yellow line and the black line were connected together, to prevent the ammeter digital flashing
- Applications: Suitable for automotive / electric cars / motorcycles battery monitoring or other products voltage current measurement;
- Wiring:
- Black line (thin): vacant or buck circuit (module) negative;
- Red line (thin): power supply+;
- Black line (thick): COM, common measuring;
- Red line (thick): PW+, measuring terminal voltage input positive;
- Yellow line (thick): IN+, current input+ (Please refer to the wiring diagrams for more details);
- Notice: The voltage between the thin red and thin black lines must be within DC 4.5~30V;
- The ammeter can only be connected to the negative of the device under test;
Exceeds 5A, long-term full load working continuously, it is recommended that the measurement side of the leads are directly soldered to the socket;
- When the black thin line vacant, it is better to use insulating tape around the exposed part of the wire, to prevent short circuits;
- If just be used as a voltmeter, it is recommended that the yellow line and the black line were connected together, to prevent the ammeter digital flashing
- Packing List:
- 1 x Digital volt amp meter
- 1 x 50A / 75mV DC current shunt
Dimensions: 1.89 in x 1.14 in x 0.83 in (4.8 cm x 2.9 cm x 2.1 cm) Weight: 2.61 oz (74 g)
This website uses cookies for the correct display and functionality. Do you also want to take full advantage of the website and accept cookies? About cookies. Accept cookies