LED: CREE XM-L2

Max output: ANSI 860 Lumens

Brightness: Turbo 860 Lumens, High 400 Lumens, Medium 120 lumens, Low 5 lumens

Max runtime: 120 hours

Max beam distance: 123 meters

Max peak beam intensity: 3800cd

Waterproof: IPX-8

Impact resistant: 1.5 Meter

Battery: 1×18650 or 2x CR123A

Rated Range: 3V ~ 9V

Dimension:

Length 110mm / 4.33 inch

Head diameter 25mm / 0.98 inch

Body diameter 22.8mm/0.9inch

Weight: 58g / 2.05oz (without battery)

Accessories: Headband (Detachable straps with silicone holder ) , clip, lanyard, magnet replace O-ring, Operator’s manual, Warranty card, Spare O-ring

Features:

1 .Super bright & latest CREE XML-2 LED, High-Performance, High-Efficiency and energy conservation.

2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot, excellent structure

and temperature resistance.

3 .Flat tail cap with strong magnet to secure to ferrous surfaces.

4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization

5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high

thermal conductivity.

6 .Side switch button to transferring mode user-friendly interface to adjust output.

7 .Four output levels and Strobe, suitable for different environment.

8 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any

mode.

9 .Automatic memory function, remember last used setting and can be preset to specific output mode

for instant access.

10 .Reverse polarity protection, to protect from improper battery installation.

11.Low-voltage prompts function, the light will flash when the battery is low, remind user replace the battery on time.

12 .Engineered anti-slip knurling for a tightly firm grip.

13 .Dual recoil absorbing springs, better impact resistance.

14 .Tail stand as a candle-light.

15 .Tail hang hole design for lanyard use, to prevent accidental dropping.

Operation

1. Battery installation & Replace magnet: Insert the battery into the flashlight, the battery positive pole

toward the light head.

Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries.

Ensure when the light turning on, the beam is directed away from the eyes.

When take the light with Bankcards(magnetic) or Cell phone, should replaced Magnet with O-ring.

2. Flashlight turning on/off: When the flashlight was OFF status:

Press the side switch to memorized brightness level.

Press and hold the side switch 0.5 second, to low mode.

Quickly double press side switch to turbo mode.

When the flashlight was ON(any mode) status:

Press and hold the side switch 0.5 second to turn off.

3. Brightness & mode selection: Brightness level:

Press side switch to Low-Mid-High-Turbo, cycle.

Special modes:

Quickly double press the side switch to Strobe (10Hz), Press side switch back to previous brightness level.

4. Low voltage indication

When the battery voltage drop down, the light will blink three times every 2 minutes.