Module performance and features:

XTW6009 is a high performance boost (BOOST) module for 4A switching current. The module uses the second generation high frequency switching technology XL6009E1 as the core chip, the performance is far more than the first generation technology of LM2577. The XL6009 boost module has lower cost and more excellent performance. The LM2577 module is about to be eliminated.
wide input voltage 3V~32V (5V boost following the normal work, but digital tube does not work), the optimal operating voltage range is 5~32V;
The ultra wide boost output voltage 5V~35V;
The built-in 4A efficient MOSFET switch, so that the efficiency of up to 94%; (LM2577 current 3A only)
high switching frequency 400kHz can filter capacitor with small capacity can achieve very good results, the ripple is smaller and smaller volume. (LM2577 frequency is only 50KHz)
with power indicator
The table shows the voltage and the voltage can be self calibrated. The voltage meter error is 0.05V, which is more advanced. Note: to ensure the accuracy of the voltage meter, please ensure that the input voltage is above 4.5V.
the touch of a button can switch to measure the input or output voltage, and indicator shows which way the voltage being measured, and save the settings, even if is power off and then boot.
The voltmeter can be closed, when do not need to display the touch keys can be easily left.
with a wiring terminal, no iron also can be easy to use, and keep the welding line connection point.
Having overheating and short circuit protection function

The size of 60*35*13.5mm
The weight of 24g

Technical parameters:
Module properties: non isolated boost (BOOST)
Rectification mode: non synchronous rectification
Input current: 4A (maximum), no-load 18mA (5V input, 8V output, no load is less than 18mA. The higher the voltage, the higher the no-load current.
Conversion efficiency: <94% (the greater the pressure difference, the lower the efficiency).
Switching frequency: 400KHz
Output ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
Load adjustment rate: 0.5%
Voltage adjustment rate: 0.5%
Working temperature: -40 ~ +85
Dimensions: 21mm * 43mm * 14mm (length * width * height)
IN+: input positive
IN-: input negative
OUT+: output positive
OUT-: output negative
Test comparison sample reference:
5V output 0.8A 9.6W 12V
7.4V output 1.5A 18W 12V
12V output 2A 30W 15V
12V output 2A 32W 16V
12V output 1.6A 28.8W 18V
12V output 1.5A 28.5W 19V
12V output 24V 1 24W A
3V output 0.4A 4.8W 12V