The lighter has the advantages of simple operation, safe and convenient, large capacity, durable and can be repeated inflatable, with double plating technology, high wear-resistant paint process, the outward appearance is exquisite, wear-resistant and easy to fade, ergonomic design machine of a texture, feel super good, strong firepower, easily ignited, implementation of International ISO9994, with explosion-proof function Filling method 1, filling, the surrounding absolutely can not have Mars or fire, to ensure safety. Do not smoke while filling; 2, the use of qualified gas, poor gas may damage the lighter or reduce the use of life; 3, the general models of aerated, please inverted lighters, gas bottle outlet alignment and cover lighter air inlet, with the beat several times, each to keep 2 seconds; if the gas can not add the word may be retained inside the steam excess air. At this point you can bleed, using a small screwdriver alignment shortness of inlet gas 1 - 2 times, then filling operation; 4, all kinds of lighters to add fuel, at least wait for 1 minutes, so that the new charging gas temperature to adjust to the room temperature, and so on and so attached to the residual gas in the lighter before the ignition can be completely volatile. If the ignition operation is immediately carried out, it may cause the residual gas in the appearance of the lighter to burn, resulting in unnecessary danger. If the flame height is too high or too low, it is a normal phenomenon, and it can be used to adjust the height of the flame. Regulating flame 1, when using, with the reduction of gas content and ambient temperature changes, the flame height will be a certain degree of change, this is a normal phenomenon, you can appropriately adjust the height of the flame; 2, when in use, the normal flame height should be regulated in the wind and straight into the class; the lighter is 1.5 - 2.5 cm. 3 and if necessary the flame height adjustment when, please with the word screwdriver alignment Flame regulator groove; such as lighters itself with the adjustment ring, can be directly used finger adjustment, to (-) in the direction of the arrow that Shun clockwise rotation, lower the flame height; to (+) the direction of the arrow head namely inverse clockwise rotation can increase the height of the flame. Note: the counter clockwise rotation, can not be in the normal flame height based on more than half circle. Otherwise, it is possible to damage the product;