- With SD Card (128MB)
- File Format: FAT
- Input voltage 5-24V optional.
-32 grade-4096 grade gray-scale control, software Gamma correction proccess.
-Supporting all kinds of point, line, surface light source, handling special shape.
-One output, the port can carry a load of 2048 lights.
-More than one controller can be connect together to work, play information can be stored in the SD card.
-T-1000S can store a maximum of 16 files, copr files to the SD card one by one.
-Files stored in the SD card must be named in order as: 00_1.led, 01_1.led, 02_1.led.
-Both one-line IC and double-line IC can be connected to this controller. note: no need to use CLK line while being connected to lamps with one-line IC.

Note:
1. While T-1000S port carry a load of 512 lights, rate of work up to 30 frames / sec. While carrying more than 512 lights, the more lights port carries, the lower rate of work will be.
2, IC of 32-grade-gray-scale can reach a speed of 30 frames/sec, while less than 1024 lights are connected to a single port, IC of 256-grade-grayscale can reach a speed of 30 frames/sec, while less than 512 lights are connected to a single port.
3, To copy files to SD card, you must first format to the SD card, pay attention to is that each copy must be formatted before.
SD card must be formatted as "FAT" format.