3in1 Miracast&DLNA/Airplay Dongle and television through the HDMI connection; or use the HDMI extension line, One end is connected with the Miracast Dongle, the other end is connected with the television. Function Description1 Mode Miracast Use steps Step 1: Plug one end of the Micro USB cable into USB port and the other end into power adapter. Step 2: Plug one end of the HDMI cable into the HDMI port on the TV, and the other end into Miracast Receiver. Step 3: Switch TV on and turn to HDMI channel. And then, screen of TV saysInitializingWaiting for connection. Pair Mobile/Tablet and TV by Miracast Step 4: On your mobile/tablet(Android 4.2 in need, like Samsung Galaxy S4).choose Setting.(*Connecting Wi-Fi before pair the devices.) Step 5: Turn onWiFichoose DisplayTurn on WiFi Displaysearch display devicesthe name of valid device is as same on TVconnect to the valid device. Step 6: Screen displaying from Connection in progress to Ready to display, mobile/tablet and TV are now paired by Miracast. You are able to see the screen of mobile or tablet on HDTV. Mode DLNA/Airplay Use steps Step 1Enable WiFi on the mobile phone/laptop/tablet, search for the AP with the SSID named by dongles device name, for example, LOLLIPOP-80833. Dongle is now working as a soft AP. So connect to the soft AP with the default password 12345678. Step 2Upon the connection between mobile/laptop/table and dongle is completed, open web browser on the mobile phone/laptop/tablet and visit http:\\192.168.49.1. Step 3Touching the icon will make the web browser jump to another page. Step 4Touch Scan and follow the instructions to connect to a WiFi AP which is able to access Internet through WAN. Till now, Miracast dongle is able to access Internet through the AP. APs SSID and Miracast dongle IP address dispatched from AP (Device IP1) will be shown on the screen. Because of Miracast dongleAP bridge function, the devicemobile phone/laptop/tablet connected to dongle is able to access Internet too. Switching mode As described above, Miracast and DLNA/Airplay are working on the different WiFi working models. There are two methods to make switching: A. By the key on PCBThe mode alternates between Miracast and DLNA/Airplay by pressing the key. B. By web: Visit http:\\192.168.49.1 by web browser when the connection between the dongle and mobile phone/laptop/tablet is established whatever under the Miracast mode or DLNA/Airplay mode. Touch the icon and the switching will be undergoing. Please pay attention that the web browser will show something error when switching. The reason is that the wifi driver should be loaded again when switching to a new mode. So the connection between devices and dongle is disconnected.