The HDMI EDID Feeder is designed to emulate the EDID (Extended Display Identification Data) information of a display and is perfect for use with a HDMI extension solution or other HDMI device that does not support EDID pass through.


EDID contains information about the capabilities of a display, including maximum supported resolution, color characteristics, etc., which allows a source device and display to operate at their highest collective performance level. Without the addition of the HDMI EDID feeder, the video system performance may be limited to a lower video resolution that the maximum capability of the display.


The HDMI EDID Feeder contains pre-programmed EDID information and is able to read and store the EDID information from a display while also providing the ability to modify EDID information and upload that revised information to a display.


Features:


- 1CH HDMI signal input, 1CH HDMI signal output


- 16 EDID modes, easily solve signal source and display monitor compatibility


- Maximum 4K supported


- Supports CEC


- HDMI output distance up to 10m, standard HDMI cable (1.4V / 26AWG)


- Easy installation without external power supply


Operation:


1. Connect the BD player / computer to EDID HDMI input terminal with HDMI cable


2. Connect input devices by HDMI cable (such as TV, etc.)


3. According to the rear display device supported resolution, manual adjustment EDID 16 modes


- HDMI input audio format: LPCM2.0/DTS/Dolby-AC3


- Maximum working current: 300mA / DC 5V


- Working temperature: 0'C~40'C


- Working humidity: 5%~85% RH (non-condensing)


- Storage temperature: -10'C~55'C


- Storage humidity: 0~90% RH (non-condensing)