PCI Express interface extend out 4 SATA interfaces; SATA III transmission standards, give full play to the SATAIII generation of hard disk transmission speed; Connecting the SSD card can better reflect SSD card's transmission advantage, compatible with SATA I and SATA II equipment. At the same time, can be directly to hang a 2.5" SSD hard disk as a system boot startup on the switch card.

PCI-Express 4X interface, compatible with 8X, 16X slot

PCI-Express 2.0 2-x interface support transmission speed up to 10.0Gbps

Support PCI-Express data transmission rate up to 5.0/2.5Gbps

Support using HDD+SSD self-built hybrid drive

HyperDuo enables two modes: Safe Mode and Capacity Mode

Safe Mode provides optimal data protection by mirroring data from the SSD to the hard disk for maximum resiliency

Capacity Mode augments SSD and HDD capacity for the most cost-effective configuration

Both modes automatically identify LBA ranges across both the SSD and HDD so that the user experience is exactly the same

Compliant with Serial ATA 3.0

4 SATA devices point-to-point connection

Plug and play, hot swap

Support startup mode

Support native command queue

Supports Port Multiplier FIS based switching or command based switching

Backward compatibility SATA II(3.0Gbps) and SATA I(1.5Gbps)

Support hardware RAID 0, 1, 10 mode (for EST11B only)

Support HyperDuo mode, safe mode and capacity mode (Cost-optimized, only suitable for EST11B)

Support Windows 7 / Vista / XP / 2000 / Server 2003-2008 32 / 64-bit, Linux, etc. Serial ATA (SATA)