Function:
See all the information relating to the vehicle
Computer test
Automatic test of all computers
Airbag test
Ccantool (OBD tests)
Base Doc (access to Technical Notes)
Physical measurements
Antipollution
Multimeter
How to Crack Renault Can Clip:
1). After Installation finish, DO NOT run your CLIP!!!
1st replace the original file (backup first your original RSRwin.exe) with the RSRwin.exe file in C:CLIP_X91LibApplication
2). Then run RSRwin.exe, choose "Register me now" and in the next window select "No"!
3). Use this Key for Registration: 333DEF-111DEF-111DEF-222DEF-221DEF-000DEF, It will work until 31/12/2020 :)
4). Recover the original RSRWin.exe
5). Run update 142
It's very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V.I.N. and press ENTER.
how to install renault? 1. Uninstall previous version of Renault CAN-Clip if you have
2. IF your 1st installation: Run Crack.reg from the folder
"Crack! Renault CAN-Clip" 1ST OF ALL!!!!! After those steps are done, install Renault CAN-Clip After installation finish & you reboot, you will get SPX Registration....
To avoid PERMANENTLY this, do the following steps:
1. Alt+Ctrl+Del (Kill process RSRWin.exe)
2. Delete RSRWin.exe (in C:\Windows)
3. Use Regedit (and Delete "ALL" values with name RSRWin)
4. Reboot your machine!!!
5. NO MORE flash for SPX Registration... Before your 1st Running with the program make those steps: You NEED to have 1 Renault Car (and ALWAYS Renault clip running-working)
when you have Renault Car!!!
1. Connect your Clip Sonde Can Interface 1st in your Car (OBD Slot)
2. Turn Ignition ON (NOT Engine running)
3. Connect your Clip Sonde Can Interface via USB cable with your computer
4. Start to installing ALL the Drivers (that they will be appearing) and
you can find those in: C:\WINDOWS\system32\drivers or from this DVD
in the folder "CAN-Clip Drivers".
5. You must INSTALL 4 Drivers (4 TIMES the same thing) After you finish, you can RUN now finally your CAN-Clip Software.....