12-bit resolution

+/- 1 LSB DNL (maximum)

+/- 1 LSB INL (maximum) (MCP3202-B)

+/- 2 LSB INL (maximum) (MCP3202-C)

Programmable analog input for single-ended input or pseudo differential input for on-chip sampling and keeping circuit

SPI serial interface (mode 0, 0 and 1, 1)

Single power supply voltage range: 2.7V to 5.5V

When VDD = 5V of maximum sampling rate is 100 KSPS

When VDD = 2.7 V maximum sampling rate of 50 KSPS

Low power consumption CMOS technology: - 500nA standby current, maximum 5uA-5V, Maximum working current is 550uA

Industrial temperature range: - 40 to + 85'C

CJMCU-3202 is A With on-chip sampling And hold circuit 12bit successive approximation type module(Analog - to - Digital, A/D) converter.

MCP3202 can be programmed for single channel pseudo differential input or dual channel single-ended input.

Differential Nonlinearity (Differential Nonlinearity, DNL)stipulation for plus or minus 1 LSB, integral nonlinear (IntegralNonlinearity, INL) to + 1 LSB (MCP3202-B) and the plus or minus 2 LSB (MCP3202-C).

It uses a simple serial interface conforms to the SPI protocol and communications devices.

Device in 5V and 2.7V working voltage conversion rate under the highest 100 KSPS and 50 KSPS respectively.

MCP3202 device of wide working voltage range of 2.7V to 5.5V. Low current design to make it consumes only 500 nA and 375uA typical standby current and working current.

MCP3202 MSOP, with 8-Pin PDIP, TSSOP and 150 milsoic provide packaging format.