Specially designed for R/C car and robot; Can be moved in top / down, smaller than 180 degree; The ov7670 camera can be used for Arduino robot and R/C car to taking scenes. A product for Arduino that works with official Arduino boards.​
Camera:
- 3V3: Input power voltage
- GDN: Grounding
- SIO_C: SCCB port control clock (some low MCU need to up control, similar to I2C)
- SIO_D: SCCB port serial data input / output port (some low MCU need to up control, similar to I2C)
- VSYNC: Frame sync signal (output signal)
- HREF: horizontal synchronizing signal (output signal)
- PCLK: pixel clock (output signal)
- D0-D7: data ports (output signal)
- RESTE: reset port (pull up in normal use)
- PWDN: power consumption choose mode (Pull down in normal use)
- OV7670 image sensor is small, low working voltage; Can provide functions of VGA photographing and image processor of MCU; Can output whole frame, sub sampling and other 8bit data via SCCB bus control; VGA image up to 30fps; User can totally control image quality, data format and transmitting way; All image processors, including gamma curve, white balance, degree of saturation and color, can be programmed by SCCB port.
- Standard SCCB port, compatible w/ I2C port; Output format: RawRGB, RGB(GRB4:2:2, RGB565/555/444), YUV(4:2:2) and YCbCr(4:2:2); Supports VGA, CIF, and all sizes from CIF to 40 x 30; Variopixel sub sampling method; Auto control functions: Auto exposure control, auto gain control, auto white balance, auto light strip eliminating, auto black level calibration; Image control include color saturation, primary color, gamma, acuteness, anti-bloom; ISP has function of noise cancelling and dead pixel compensation; Supports image zooming, lens light compensation; 50/60Hz auto check; Saturation auto adjust (UV); Edge enhancing auto adjustment and auto adjust noise reduction.
- Photographic array: 640 x 480
- IO voltage: 2.5~3V
- Power consumption: 60mW / 15fps
- Sleep: <20uA
- Temperature: -30~70'C
- Working temperature: 0~50'C
- Output format (8bit): YUV/YCbCr4:2:2, RGB565/555/444, GRB4:2:2, Raw RGB Data
- Optical size: 1/6"
- Viewing angle: 25 degree
- Max. frame rate: 30fps
- VGA sensitivity: 1.3V (Lux-sec)
- NSR: 46dB
- Dynamic: 52dB
- Browsing method: line by line
- Electronic exposure: line 1~510
- Pixel area: 3.6 x 3.6um
- Dark current: 12mV/s T 60'C
Cradle Head:
- Suitable for normal 9g servo
- Weight: 15g
- Working torque: 1.6KG/cm
- Response rotary speed: 0.10s / 60 degree
- Working temperature: -30~60'C
- Dead zone: 2ms
- Plug: JR, Futaba
- Rotating angle: Max. 180 degree
- Servo: digital servo
- Working current: 0.02A
- Working voltage: 3.5~6V
- Structure: Nylon + plastic gear