Features:
When there are moving objects into the induction range, the switch began to load power. If the activity within the sensing range and the delay period, the switch will continue automatically delay, do not turn off the lights. Remains stationary or leave the sensor range, automatic lights switch after delay of one cycle.
Comes with ambient light detection, default only light at night (adjustable work during the day)
Some non-metallic materials can penetrate induction, such as glass, gypsum board, wood, plastic, etc., may be less than 15cm wall penetration induction. Particularly suitable for hidden installation, does not affect the appearance.Precautions:
1. Do not live operation, it must be installed by professionals.
2. Do not overload use.
3. Do not object to the volatile as the mounting base surface. In the sensing area, do not affect the object switch to detect obstacles or stop the movement, do not have electromagnetic interference from other devices, such as high-voltage, etc. and the like.4. When first powered, sensor switch or sensor light will automatically energized after a delay period is off normal light control and sensing.
5. Because it is active sensors, sensor switch will transmit radio waves, so in the absence of blocking situations, the distance between two microwave or microwave sensor light sensor switch between the best kept more than five meters, a short distance would interfere with each other.
6. This product is not suitable for outdoor installation.
Special Note:
A. radar sensor switch the distance problem, by the actual installation of environmental impact, the distance is generally about 3-9 meters, the narrow space where the smaller sensing range, such as corridors, hallways and the like; the open space where the sensing range large, such as garages and the like. This is not a quality problem switches, microwave features, a small space because the reflected waves cancel each other out and normal emission wavelength caused.
B. After adjusting the sensing range, need to wait three minutes before the range adjusted, so do not think adjustment did not respond.
Adjustable Illustration: adjustable product, please be sure to use when debugging a slotted screwdriver to gently adjust encountered resistance it is at the end, and can not move forward, otherwise it will transfer the bad parts.