Features:
1. Applicable to Arduino / 51 / AVR / STM8 / STM32 and other microcontroller.
2. Applicable to 3.3V / 5V embedded system
3. The Serial MPU6050 module integrates the attitude solver, with dynamic Kalman filter algorithm.Can
get accurate attitude in a dynamic environment. Attitude measurement precision is 0.01 degrees, high
stability. Performance is even better than some professional inclination instrument!
4. Using high-precision gyro accelerometer MPU6050, read the measurement data by serial port, No need to
study complex I2C protocol of MPU6050 .
5. Professional PCB layout and good manufacture processes to ensure the highest quality.
6. Keep I2C interface of MPU6050 to meet the needs of advanced users.
7. With advanced digital filtering technology, reduce the measurement noise and improve measurement
accuracy.
8. Using stamps holes gold plating, quality assurance, can be embedded in the user's PCB board
Technical Indicator
1 Input voltage: 3V-6V
2 Consumption current: <10mA
3 Volume: 15.24mm X 15.24mm X 2mm
4 Pad pitch: up and down 100mil (2.54mm), left and right 600mil (15.24mm)
5 Measuring dimensions: Acceleration: 3D Angular Velocity: 3D Attitude angle: 3D
6 Range: Acceleration: ± 16g, angular velocity: ± 2000 ° / s.
7 Resolution: Acceleration: 6.1e-5g, Angular velocity: 7.6e-3 ° / s.
8 Stability: Acceleration: 0.001g, angular speed 0.02 ° / s.
9 Attitude stabilization measurement: 0.01 °.
10 The data output frequency 100Hz (baud rate 115200) / 20Hz (9600 baud).
11 Data Interface: Serial (TTL level), I2C (directly connected MPU6050, no attitude output).
10 Baud rate 115200kps / 9600kps.
11 Provide single-chip analytical sample code.
Instruction:
USB serial module connect to 6050 module: + 5V USB Serial module, TXD, RXD, GND VCC . 6050 module: RX, TX, GND. Note TXD and RXD cross.
And Serial MPU6050 interfaces required to use computers TTL level serial ports, it is recommended to use serial module in our shop.
Connet to PC via USB to TTL modules:
Connect to MCU
PC program