Keypad Status instruction:
1.Normal working status: the LED will light on 3 seconds if user press any numeric keys. After 3 seconds, the LED will light off automatically if there is no further operation.
2.Dormant status: usually the keypad will enter dormant status if there is no further operation within 30 seconds.(By Press any button, the keypad will enter working status. And if the keypad detect battery in low voltage before dormant status, it will send low voltage signal to alarm panel.)
3.RFID swiping card status: press “*” button, LED lights on and the keypad will enter swiping tag status. If the keypad detect the RFID tag or if there is no tag within 10 seconds, then the keypad will return to dormant status.
4.Setting status: input Administrator password and then press “#” button, the keypad will enter functional setting status. The LED will flash at 500ms. Press “*” button to exit or if there is no operation within 30 seconds, the keypad will exit from functional setting status and enter return to dormant status.
Note: if operation is correct, the buzzer will make a sound like “beep”. if operation is wrong, then the buzzer will make two sounds like
“beep, beep”.
Under normal working status, press other keys except the “*” button and numeric keys, the input will end.
Under functional setting status, press “#” button to end the input.
Technical parameters:
Product name: wireless keypad
Work power: Three AAA batteries
Standby current: ≤30uA
Emission current: ≤20mA
Tag quantity that keypad support: 60pcs
Wireless distance: ≥80M (open area, no interference)
Wireless frequency: 433Mhz
Shell material: ABS plastic
Working condition: Temperature: -10~55 Humidity: 80%RH (no condensation)
Size(length x width x height): 138 x 89 x 17mm