The lock is the use of small electric solenoid working principle, only supports instant power unlock and does not supported for a long time to work and too often energized unlocking operation, otherwise it may be easily burned.
Features:
- Working voltage: DC 9-12V
- Working current:
[email protected]- Rated power: 9.6W
- Unlock time: 1 second, unlock duration should be less than 10 second
- Lock tongue size: 10mm
- Output wire: Red(9-12V), black(GND)
- Wire length: 38cm
- Applications: Door, Drawer, Storage Cabinet
- Great for DIY
Note that the orientation of lock bolt can be adjusted at will:
First, use cross screw driver take off the screws, and remove the cover.
Second, remove the snap ring with a screwdriver
Third, taken directly out of the lock cylinder
Fourth, adjust the direction of locking tongue, put the snap ring back in its original position
Fifth, cover the plate and tighten the screws.