BSDIE ACM23 Smart AC Digital Clamp Meter
Features:
The instrument shall be re-calibrated at an interval of one year under the conditions of 18 �-28 �
and relative humidity of less than 75%.
Specifications:
ď‚Ą The instrument is designed to automatically select measurement functions and measuring ranges.
ď‚Ą Full range overload protection.
ď‚ĄAllowable max voltage between terminal to be measured and ground:600V DC or 600V AC
ď‚Ą Working weight: max2000m
ď‚Ą Display unit: LCD
ď‚Ą Max display value:6000 numbersď‚Ą Polarity indication: automatic indication.“-”indicates negative polarity.
ď‚Ą Over range indication:‘0L’ or ‘-0L’
ď‚Ą Sampling rate: approximately 3 times per second
ď‚Ą Unit display: to display functions and electric quantity
ď‚Ą Automatic shut-down time:10 minutes
ď‚Ąď€ Power supply: 1.5V AAA battery ×2
ď‚Ąď€ Battery under-voltage indication: LCD display symbol .
 Temperature coefficient: less than0.1x accuracy/�
 Working temperature: 18� ~ 28�
Storage temperature:-10� ~ 50�
Current clamp
Clamp diameter ize 20mm for
AC current measurements,
Hold a trigger, open clamp
head, and catch one guide
wire of a line to be measured
Data hold Backlight key
Data hold Backlight key
Reading hold
During the process of measurement,
gently touch the Data hold/Backlight
ke monitor's display value will be
locked. Touch again the Data hold/
Backlight ke the readings hold will
be removed
Data hold Backlight key
Backlight
In the process of measurement, if the
measurement environment is too
dark, press the key Data hold/
Backlight for more than 2 seconds to
enable backlight function. Then
about 1 minute later, the backlight
function will be automatically disabled.
Func key
select measurement functions
Press the FUNC key to switch to
AC current /DC current measurement
mode
Display screen
6000 digital LCD displays clear,
backlit read data more convenient
MEASUREMENT OPERATION
AC current measurement
1.Hold a trigger, open clamp head,
and catch one guide wire of a line
to be measured
2. Press the FUNC key to switch to
AC current measurement mode.
When the measured signal is >0.01A,
the instrument will display the
measured current value.
DC voltage measurement
Press FUNC key to switch to DC
current measurement mode,
connect the pen-shaped meter
to the DC voltage signal being
measured , and then the
instrument will display the
measured
Electric resistance measurement
Connect the pen-shaped meter with
the resistance being measured. When
the measured resistance is >6kΩ, the
instrument will display- - - -; when the
measured resistance is less than 50Ω,
the buzzer will sound alarms and
On/Off indicator will be on sim