This is a 2.2 inch TFT LCD which has rich colors and high resolution. This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller.
Solder the LCD to the adapter module, then solder the pin headers, so that you can use the dopont cable to test the functions. After your code and circuit test is successful, the circuit can be designed and the sample can be produced.
With GPRS module, you can design your phone.
With NFC reader module, you can create access control systems with the photos show.
With voltage and current sensor, you can make oscilloscope.
- Can use it directly to display characters, graphics and BMP format images.And touch controlling is available
- Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V Arduino board / STM32 / ARM / Raspberry Pi, you generally need to add a level conversion circuit if you use a 5V Arduino Board (Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo).
- Arduino library: UTFT
- Driver IC: RM68130
- Touch screen type: resistive touch screen.
- Pin pitch: 0.8mm
- Resolution: 176 x 220, 16-bit (262, 000) color
- Display size: 2.2 inch;
- Operating voltage: 3.3V;
- Logic level: 3.3V;
- Operating current: the maximum is 100mA
- An external transistor circuit can be added to control backlight brightness
- Control interface: CS / RS / WR / RD
- Data interface: 8-bit
- Very suitable for making handheld device, MP3 / MP4 player, digital photo frame, oscilloscope, function generator, detection system display