296x128, 2.9inch E-Ink display module, three-color, SPI interfaceOverviewThis is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supportsred, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. FeaturesNo backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingSPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) SpecificationsOperating voltage: 3.3VInterface: 3-wire SPI, 4-wire SPIOutline dimension: 89.5mm × 38mmDisplay size: 66.89mm × 29.05mmDot pitch: 0.138 × 0.138Resolution: 296 × 128Display color: red, black, whiteGrey level: 2Refresh power: 26.4mW(typ.)Standby power: <0.017mWViewing angle: >170° InterfaceSYMBOLDESCRIPTION VCC3.3V GNDGround DINSPI MOSI pin CLKSPI SCK pin CSSPI chip selection, low active DCData/Command selection (high for data, low for command) RSTExternal reset, low active BUSYBusy status output, low active
General
Brand
Waveshare
Model
2.9inch e-Paper Module (B)
Quantity
1 set
Form Color
2.9inch e-Paper Module (B)three-color
Material
RF4, PCB, LCD
Specification
English Manual / Spec
No
Download Link
www.waveshare.com/wiki/2.9inch_e-Paper_Module_(B)
Dimensions & Weight
Dimensions
3.5 in x 1.5 in x 0.12 in (8.9 cm x 3.8 cm x 0.3 cm)
Weight
1.31 oz (37 g)
Packing List
1 x 2.9inch e-Paper Module (B) 1 x XH2.54 20cm 8Pin
This website uses cookies for the correct display and functionality. Do you also want to take full advantage of the website and accept cookies? About cookies. Accept cookies