264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interfaceOverviewThis is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supportsred, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
FeaturesNo backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingCompatible with Raspberry Pi 2B/3B/Zero/Zero WOnboard 4x KeysSPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) SpecificationsOperating voltage: 3.3VInterface: 3-wire SPI, 4-wire SPIOutline dimension: 85mm × 56mmDisplay size: 57.288mm × 38.192mmDot pitch: 0.217 × 0.217Resolution: 264 × 176Display color: red, black, whiteGrey level: 2Refresh power: 26.4mW(typ.)Standby power: <0.017mWViewing angle: >170° InterfaceSYMBOLDESCRIPTION VCC3.3V GNDGround DINSPI MOSI pin CLKSPI SCK pin CSSPI chip selection, low active DCData/Command selection (high for data, low for command) RSTExternal reset, low active BUSYBusy status output, low active