new 5.5 LED OBD-II HUD Head Up Display Q7 Key Features:
1. Apply to all cars in the world. Plug and Play.
2. 5.5 inch screen and high-definition display
3. Multi-color design makes the screen more abundant and easier to read
4. The use of nano-technology to eliminate unwanted reflections and can make display information sharper.
5. Display content rich: speed, driving direction, driving time, driving distance, real-time, number of satellites, altitude, speed, free switching alarm between kilometers and miles
6. Auto power on and off with vehicle started and shutdown, effective protection of car battery; keeping the manual mode switch, and easier to control HUD.
7. Automatic and manual brightness adjustment mode.
Q7 HUD BUTTON FUNCTION:
1. USB interface, contact the OBD interface of the vehicle.
2. Power button
3. Wave button: Up button (by turning the knob to the head), the OK button (by pressing the button upright), Down button (by turning the knob to the negative side)
Q7 HUD DISPLAY INFORMATION:
1. real time icon
2. display of driving time and altitude
3. icon function setting
4. speed alarm
6. driving direction and buzzer mark
7. driving distance (KM / MILES) and driving time (Min)
8. speed and tension
9. unit of speed and tension
10. light sensor
11. unit distance and driving time
12. Satellite icon
13. satellite number
14. icon speed
Q7 HUD INSTALLATION:
put HUD on non slip mat and then put on the dashboard. connect one side of the USB cable with HUD interface and connect the other side of the USB cable to the cigarette lighter car. after turning on the engine, LED will light up, satellite icon will blink and HUD will search the satellite signal, HUD will work.
project to display information in front of the HUD car stops, because the breeze is double, which will cause the double image in the stop when the display. The double car picture will be different. If you can clearly see the display information, then there is no need to use the reflection movie. if there is a double image, then please use the reflection movie.
Q7 HUD DEFINITION:
1. Long press the wave button vertically to 5S
please enter the setup mode, there are three buttons for wave button: up button (turning the button to the head), the OK button (pressing the button upright), Down button (turning the knob to the negative side) , after entering the setting mode, press the OK button vertically at once, the menu will increase. by turning the head or button to increase or decrease the handicap parameter. after finishing the adjustment, press and hold the wave button vertically to 5S to return to the display interface.
2. Vertically short press the OK button
change the display of information, for example. KM, driving time (MIN), Mileage
3. Disadvantage turn the wave button to 5S, the icon alarm bell will be turned off, and disadvantage turn the wave button to 5S again, the bell icon alarm will go on.
4. Restore the factory setting: when HUD is turned on, press and hold the wave button vertically to 5S to enter the setup menu, quickly press to say 8, and negative wave button to parameter 1, and press the wave button to 5S to return to the display interface