This is joystick control and button keypad breakout board module. Onboard one game joystick and 4 buttons. The shape of the PCB is suitable for your hands.
It leads out Arduino Shield pins and you can solder the pin headers so that it becomes a shield.
It leads out I2C port of Arduino and you connect it with I2C oled / I2C 1602 LCD module to display something.
It leads out D8 / D12 / D13 of Arduino and you can connect it [OPEN-SMART 2.4G Wireless Serial Transparent Transceiver Module] so that you can make a wireless remote control to control your smart car / 4-axis aircraft. Also you can use D12 / D13 to be software serial port to connect it with serial Bluetooth module.
Thumb joystick X-Axis movement will produce a analog signal on pin OUTX, while Y-Axis movement will produce a proportional analog voltage on pin OUTY, and Z-Axis movement will produce a digital signal on pin OUTZ.
Features:
- Compatibility: compatible with Arduino UNO R3 / Mega2560 / Leonardo;
- Working voltage: 3-5.5V
- Working current: 2mA
- Buttons: with beautiful color key cap and pins are all float, so you should pull up it in your MCU(Active low level output)
- Thumb joystick: x and y axis output voltage is 0-VCC, z axis is a float button, you should also pull up it in your MCU(Active low level output).
- Positioning hole diameter: 3.2mm