*Suitable for cars with OBD2 and EUOBD port (Car automatic diagnosis system)
*Multi-color screen design makes it more abundant and easier to read
*Multi-Function in 1: display speed, RPM, water temperature, voltage, instantaneous fuel consumption, average fuel consumption, driving distance measurement, shift reminders, fatigue driving reminders, low voltage alarm, high water temperature alarm, over speed alarm, engine failure alarm, eliminate the fault code, freely switch between kilometers & miles
*Easy to use: plug and play
*Automatically power on/off: power on when vehicle starts; power off when vehicle stops, which provides effective protection for the car battery
*Retains the manual switch mode, more easy to control
*100% Brand New and High Quality
1.Multi-function Display: fuel consumption, voltage, water temperature, single driving time(Minutes), single driving distance(KM, Mile), Engine RPM
2.Unit for multi-functional area
3. Light Sensor
5.Alarm Icon: high water temperature alarm, low voltage alarm, over speed alarm, shifting reminding
6.Setting, fatigue alarm, fault code
9.Speed Unit in MPH
10.Speed Unit in KM/H
How to install and use:
1.You should know whether your vehicle is compatible with OBD2 agreement or EU OBD agreement or not. Open the engine hood and find the sticker below it, if it has words like OBD2 CERTIFIED, then it can be installed.
2.Find out the 16 pin diagnostic link of the vehicle and connect it well with OBD2 connecting line.
3.First time to use:
Start the engine and the OBD Smart Digital Meter is power on, it will show the voltage and scan the OBD2 program. If it displays the fuel consumption, speed, RPM, it means installation successfully. After a few minutes, If it still show the voltage only, please check the device, OBD cable, and OBD2 interface to make sure plug well , then turn on again.