Overview
This is an E-Ink display module, 1.54inch, 152x152 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
No backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/STM32)
Specifications
Operating voltage: 3.3V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 31.8mm × 37.32mm × 1.05mm
Display size: 27.51mm × 27.51mm
Dot pitch: 0.181 × 0.181
Resolution: 152 × 152
Display color: yellow, black, white
Grey level: 2Full refresh time: 27s
Refresh power: 26.4mW(typ.)
Standby power: <0.017mW
Viewing angle: >170° Interface
SYMBOLDESCRIPTION VCC3.3V GND
Ground DINSPI MOSI pin CLKSPI SCK pin CSSPI chip selection, low active DCData/Command selection (high for data, low for command) RST
External reset, low active BUSY
Busy status output, low active