Features：
Advanced MPPT technology, with efficiency no less than 99.5%\Ultra-fast tracking speed and guaranteed tracking efficiencyAdvanced MPPT control algorithm to minimize the maximum power point loss rate and loss timeWide MPP operating voltage rangeHigh quality components, perfecting system performance, with maximum conversion efficiency of 98%Accurate recognition and tracking of multiple-peaks maximum power point International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service lifeCharging power and current limitation functionCompatible with lead-acid and lithium-ion batteriesBattery temperature compensation functionReal-time energy statistics functionOverheating power reduction functionMultiple load work modesThe communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection. With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.Monitor and set the parameters via mobile phone APP or PC software Full-load operation without any drop in capacity within the range of working environment temperature Extensive electronic protection photo 2
Technical Specifications:
ItemTracer 1206ANTracer 2206ANTracer 1210ANTracer 2210ANTracer 3210ANTracer 4210AN System nominal
voltage12V/24VDC Auto Rated charge current10A20A10A20A30A40A Rated discharge
current10A20A10A20A30A40A Battery voltage range8~32V
Max. PV open circuit voltage46V92V MPP voltage range(Battery voltage +2V)~36V(Battery voltage +2V)~72V Max. PV input power130W/12V
260W/24V260W/12V
520W/24V130W/12V
260W/24V260W/12V
520W/24V390W/12V
780W/24V520W/12V
1040W/24V Self-consumption<=12mA Discharge circuit voltage drop<=0.23V Temperature compensate coefficient-3mV/°C/2V (Default) GroundingCommon negative RS485 interface5VDC/100mA LCD backlight time60S (Default) Environmental Parameters Working environment temperature-25°C~+50°C(100% input and output) Storage temperature range-20°C~+70°C Relative humidity<=95%, N.C. EnclosureIP30 Dimension172x139 x 44mm220x154x 52mm172x139 x 44mm220x154x 52mm228x164x55mm252x180x63mm Mounting dimension130x130mm170x145mm130x130mm170x145mm170x164mm210x171mm Terminal12AWG(4mm 2 )6AWG(16mm 2 )12AWG(4mm 2 )6AWG(16mm 2 )6AWG(16mm 2 )6AWG(16mm 2 Recommended cable12AWG(4mm 2 )10AWG(6mm 2 )12AWG(4mm 2 )10AWG(6mm 2 )8AWG(10mm 2 )6AWG(16mm 2 ) Weight0.57kg0.94kg0.57kg0.94kg1.26kg1.65kg
Accessories (optional):

​Remote Temperature Sensor
(RTS300R47K3.81A)
RTS300R47K3.81AAcquisition of battery temperature for undertaking temperature compensation of
controlparameters, the standard length of the cable is 3m (length can be
customized). The RTS300R47K3.81A connects to the port (4th) on the controller.
NOTE: The temperature sensor short-circuited or damaged, the controller
will be charging or discharging at the default temperature 25°C
Click USB to RS485 cable
CC-USB-RS485-150U
CC-USB-RS485-150UUSB to RS-485 converter is used to monitor each controller on the network
using Solar Station PC software. The length of cable is 1.5m.
TheCC-USB-RS485-150U connects to the RS-485 Port on the controller.
Click OTG cable
OTG-12CM
OTG-12CMUsed to connect a mobile communication cable and able to achieve real-time
monitoring of the controller and modification of the parameters by using mobile
APP software.
Click Remote Meter
MT50
MT50MT50 can display various operating data and fault of the system. The
information can be displayed on a backlit LCD screen, the buttons are
easy-to-operate, and the numeric display is readable.
Click WIFI Serial Adapter
eBox-WIFI-01
WIFIAfter the controller is connected with the eBox-WIFI-01 through the standard
Ethernet cable (parallel cable), the operating status and related parameters of
the controller can be monitored by the mobile APP software through WIFI signals.
Click RS485 to Bluetooth Adapter
eBox-BLE-01
bLEAfter the controller is connected with the eBox-BLE-01 through the standard
Ethernet cable (parallel cable), the operating status and related parameters of
the controller can be monitored by the mobile APP software through Bluetooth
signals.
Click